BPQPD - ASTROQUARTZ MAT
- MSDS: BPQPD
- Manufacturer: J P STEVENS AND CO INC
- Product Name: ASTROQUARTZ MAT
- National Stock Number: 9620-00N033912
Product Identification
Product ID:ASTROQUARTZ MAT
MSDS Date:10/22/1986
FSC:9620
NIIN:00N033912
MSDS Number: BPQPD
Responsible Party
GREENVILLE, SC 29602
US
Emergency Phone: 803-239-4129
Info Phone: 803-239-4129
Cage: IO369
Contractor
Telephone: 803-239-4129
Cage: 4X691
Ingredients
SILICA, CRYSTALLINE - FUSED
CAS: 60676-86-0
RTECS: VV7328000
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: INHALATION OF LARGE
AMOUNTS MAY IRRITATE UPPER RESPIRATORY TRACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SKIN, EYE & RESPIRATORY TRACT IRRITATION.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS AS
W/PROLONGED/REPEATED EXPOSURE TO ANY DUST.
First Aid
First Aid:EYE:FLUSH W/WATER FOR AT LEAST 15 MINS. GET MEDICAL
ASSISTANCE IF IRRITATION PERSISTS. SKIN:WASH W/SOAP & WATER.
INHAL:REMOVE TO FRESH AIR. INGEST:CALL MD IMMEDIATELY .
Fire Fighting
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:USE THAT WHICH IS APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . MATERIAL IS NON-COMBUSTIBLE.
Unusual Fire/Explosion Hazard:WHEN HEATED TO EXTREME TEMPERATURES (OVER
900C) THIS MATERIAL MAY CRYSTALIZE OR MELT INTO GLASS.
Accidental Release
Spill Release Procedures:IF FUSED SILICA PARTICLES ARE GENERATED THEN
THE MATERIAL SHOULD BE COLLECTED IN A MANNER TO MINIMIZE THE
GENERATION OF AIRBORNE DUST. THOSE INVOLVED IN CLEAN UP OF
PARTICULATES SHOULD USE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE & USE IN A MANNER THAT WILL
PREVENT AIRBORNE PARTICULATES IN THE WORKPLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORS WHERE DUST
LEVELS EXCEED TLV. NIOSH/MSHA APPROVED AIR SUPPLIED OR SELF
CONTAINED RESPIRATOR FOR NON-ROUTINE & EMERGENCY SITUATIONS.
Ventilation:LOCAL EXHST RECOM FOR PROCESSING MACHINERY WHERE DUST
GENERATION IS APPARENT. MECH (GENERAL) WHERE LOCAL EXHST (SUP DAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WORK APRON OR SMOCKS ARE RECOMMENDED.
BARRIER CREAMS IF NECESSARY.
Work Hygienic Practices:WASH THOROUGHLY AFTER WORK. LAUNDERING WORK
CLOTHES SEPARATELY IS RECOMMENDED.
Supplemental Safety and Health
MATL TO AVOID:TRIOXIDE. AVOID OXYGEN DIFLUORIDE, CHLORINE TRIFLUORIDE &
HOT PHOSPHORIC ACID. VENT:VENTILATION IS NOT FEASIBLE.
Chemical Properties
Boiling Pt:B.P. Text:3632F,2000C
Melt/Freeze Pt:M.P/F.P Text:>1652F,900C
Spec Gravity:2.2 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE NON-WOVEN MAT; NO ODOR (NEEDLE PUNCHED MAT).
Stability
Stability Indicator/Materials to Avoid:YES
MAY REACT W/HYDROFLUORIC ACID TO PRDCE SILICON TETRAFLUORIDE GAS.
REACTS W/XENON HEXAFLUORIDE TO PRDCE XENON (SUPP DATA)
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:FOLLOW LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.